1.Air cooled or water-cooled type
2.Power range: ≤55KW
3.Speed range: 300-600r/min
4.Flow range: 1000Nm³/h
5.Inlet pressure:0-0.6MPa
6.Outlet pressure: ≤10MPa
7.Compression stage: 1-4 stages
If you have compressor inquiry please tell us follows information when you send inquiry:
*Compressor working medium: If single gas ,how many purity ? if mixed gas , what's gas content lit ?
*Suction pressure(gauge pressure):_____barg
*Exhaust pressure(gauge pressure):_____barg
*Flow rate per hour for compressor: _____Nm³/h
Compressor gas suction temperature:_____ºC
Compressor working hours per day :_____hours
Compressor working site altitude :_____m
Environment temperature : _____ºC
Has cooling water in the site or not ?______
Voltage and frequency for three phase :____________
Do not has water vapor or H2S in the gas ?______
Application for compressor?__________
The Oil-free piston booster compressor is widely used in oxygen industry such as air separation oxygen plant and medical industry.
Technical Paramter of Low pressure Oil Free Piston Oxygen Gas Booster Compressor
| Model |
Flow rate |
Suction Pressure |
Discharge Pressure |
Motor Power |
Dimension |
Interface diameter |
| Nm3/h |
MPa |
MPa |
KW |
mm×mm×mm |
|
| ZWZ-5/1.5-10 |
5 |
0.15 |
1 |
1.5 |
1000×500×700 |
Rc 1/2' |
| VWZ-10/1.5-10 |
10 |
0.15 |
1 |
2.2 |
1000×500×700 |
Rc 1' |
| VWZ-15/1.5-10 |
15 |
0.15 |
1 |
3 |
1000×500×700 |
Rc 1' |
| WWZ-20/1.5-10 |
20 |
0.15 |
1 |
4 |
1200×650×800 |
Rc 1' |
| WWZ-25/1.5-10 |
25 |
0.15 |
1 |
5.5 |
1200×650×800 |
Rc 1' |
| WWZ-30/1.5-10 |
30 |
0.15 |
1 |
5.5 |
1200×650×800 |
Rc 1' |
| WWZ-50/1.5-10 |
50 |
0.15 |
1 |
7.5 |
1200×650×800 |
Rc 1' |
| ZWZ-5/4-14 |
5 |
0.4 |
1.4 |
1.5 |
1000×500×700 |
Rc 1/2' |
| ZWZ-10/4-14 |
10 |
0.4 |
1.4 |
2.2 |
1000×500×700 |
Rc 1' |
| ZWZ-15/4-14 |
15 |
0.4 |
1.4 |
2.2 |
1000×500×700 |
Rc 1' |
| VWZ-20/4-14 |
20 |
0.4 |
1.4 |
3 |
1200×650×800 |
Rc 1' |
| VWZ-25/4-14 |
25 |
0.4 |
1.4 |
4 |
1200×650×800 |
Rc 1' |
| VWZ-30/4-14 |
30 |
0.4 |
1.4 |
5.5 |
1200×650×800 |
Rc 1' |
| WWZ-50/4-14 |
50 |
0.4 |
1.4 |
7.5 |
1200×650×800 |
Rc 1' |
All standard cylinder oxygen filling diaphragm compressor are CE marked to meet the requirements of the EU market. We can also provide customized plant filling oxygen compressor according to customer conditions. Our microboost medical oxygen compressor have the following features According to the different working conditions of the customer:
1. Completely 100% oil free, no oil required (depending on the specific model)
2. Oxygen for PSA Oxygen Generator
3. NO pollution, keep the same purity into the gas
4. RELIABLE and high quality, comparable to the American RIX brand.
5. TOP low cost, low maintenance cost, simple operation, just change the piston ring
6. 4000 hours piston ring working life under low pressure conditions, 1000-2000 hours working life under high pressure conditions
7. High quality high efficient brand motor, can be customized for high sea level use with more long service life.
8. CE approved to meet the requirements of the EU market
9. According to the customer's specific working conditions, the compressor is designed for single machine compression, two-stage compression, three-stage compression and four-stage compression.
10. Low speed, long life, average speed 360-760RPM,
11. Low noise, average noise below 75dB, can work quietly in the medical field
12. Each stage has an interstage safety valve. If the stage is overpressured, the safety valve will take off and release the overpressure gas to ensure the stable operation of the compressor.
13. Each level has a temperature controller. If the temperature between the stages exceeds the standard, the temperature display will sound and light alarm.
Oil free Process Gas Piston Compressor
TOTALLY OIL FREE HIGH PRESSURE RECIPROCATING PISTON COMPRESSOR
Description of Advantages of Oil-free Piston Compressor
1) Totally 100% oil free type gas compressor, cylinder no need oil lubrication, ensure cylinder 100% no oil content.
2) Suitable compressing for Oxygen gas, Hydrogen gas, Nitrogen gas, Helium gas, Argon gas, CO2 gas, Air gas, Biogas, Methane gas and other special gas
3) No pollution, keep same purity to inlet gas
4) Reliable and top quality, comparable with USA RIX brand.
5) Top cost performance, low maintenance cost, and easy operation, only need to change piston ring
6) 4000 hours piston ring working life,1500-2000 hours working life for final stage ring 7
7) Top brand motor, and can be specially pointed, like Simense brand
8) Supply Japan market, quality approval by Japan strictly system
9) CE approval
10) The gas compressor carefully designed and manufactured for 2Mpa, 4Mpa,10Mpa, 15Mpa, 20MPa-30MPa pressure etc.
11) The device has a small size, lightweight, easy maintenance, and friendly at moving and operating.
12) Output gas non-toxic, odorless. Suitable for filling high-pressure air displacement and small and medium-sized gas station
Model
SF6 COMPRESSOR
Power(Hp,Kw): 3KW-110KW
Working Pressure(Bar,Psi): 150/200/250/300bar/350bar
Air Delivery(L/min,CFM): 5/10/15/20/25/30/35/40/50/60/100 Nm3/Hr
Inlet pressure ,outlet pressure: 0.2-0.4Mpa, 10Mpa/15Mpa/20Mpa/23Mpa/30Mpa
Speed(r.p.m): 200-400
pressure stage: 3-4-5barg
Net Weight(Kgs): 1200
Cooling way: Air cooling/water cooling
| 150bar Oil-Free Piston Type Oxygen Booster Compressor Technical Parameters Table |
| Model |
Flow rate |
Suction Pressure |
Discharge Pressure |
Motor Power |
Inlet Interface diameter |
Outlet Interface diameter |
Dimension |
| Nm3/h |
MPa |
MPa |
KW |
mm×mm×mm |
| WWZ-5/4-150 |
5 |
0.4 |
15 |
4 |
DN20 |
M14×1.5 |
1080×820×850 |
| WWZ-8/4-150 |
8 |
0.4 |
15 |
5.5 |
DN20 |
M14×1.5 |
1080×820×850 |
| WWZ-10/4-150 |
10 |
0.4 |
15 |
7.5 |
DN20 |
M14×1.5 |
1080×870×850 |
| WWZ-12/4-150 |
12 |
0.4 |
15 |
7.5 |
DN20 |
M14×1.5 |
1080×870×850 |
| WWZ-15/4-150 |
15 |
0.4 |
15 |
11 |
DN20 |
M14×1.5 |
1150×970×850 |
| WWZ-20/4-150 |
20 |
0.4 |
15 |
15 |
DN20 |
M14×1.5 |
1150×970×850 |
| WWZ-25/4-150 |
15 |
0.4 |
15 |
11 |
DN20 |
M14×1.5 |
1150×970×850 |
| WWZ-30/4-150 |
20 |
0.4 |
15 |
15 |
DN20 |
M14×1.5 |
1150×970×850 |
| WWZ-25/4-150 |
25 |
0.4 |
15 |
11 |
DN20 |
M14×1.5 |
1350×1100×950 |
| WWZ-30/4-150 |
30 |
0.4 |
15 |
15 |
DN20 |
M14×1.5 |
1450×1100×1000 |
| WWZ-45/4-150 |
45 |
0.4 |
15 |
18.5 |
DN20 |
M14×1.5 |
1580×1200×1120 |
| WWZ-50/4-150 |
50 |
0.4 |
15 |
18.5 |
DN20 |
M14×1.5 |
1680×1250×1220 |
| WWZ-60/4-150 |
60 |
0.4 |
15 |
22 |
DN20 |
M14×1.5 |
1780×1300×1250 |
Recommend the another Oil free Diphragm Compressor
The diaphragm compressor booster is a special structure of the
volume-type compressor with
high compression ratio, good leak tightness, compressed gas without lubricating oil and other solid impurities contaminated features, So it's suitable for
high purity compression, rare, valuable, inflammable, explosive, toxic, harmful, corrosive, and high pressure gas.
Keepwin produced Helium compressor, Oxygen Compressor, Hydrogen Compressor, Nitrogen Compressor, Recovery H2 Gas compressor, Argon compressor, cylinder filling booster compressor, etc widely used in
Petrochemicals, Fine Chemicals,
Pharmaceutical Chemicals,
Energy Chemicals,
Machinery Industry,
Electronics Industry,
Agriculture,
Animal Husbandry and
Defense Industry, Astronomy,
Aerospace,
Medical and other fields.
.
Advantages of Diaphragm compressor:
1. Oil-free compression due to the
hermetic separation between gas and oil chamber.
2. Abrasion-free compression due to
static seals in the gas stream
3.
Automatic shutdown in case of a diaphragm failure prevents damage
4. High Compression Ratios-
Discharge pressure up to 1000bar (14500 psig).
5.
Contamination Free Compression
6. Corrosion Resistance
7. High Reliability
As a displacement compressor with special,diaphragm compressor is
characterized by large compression ratio,
good sealing performace,and that the compress air will not be polluted by lubricant or other solid impurities.Therefore diaphragm compressor is applicable to compress
high-purity,
rare and precious,flammable and explosive,toxic and hazardous,corrosive and high pressure gases.
Keepwin diaghragm compressors consist of four types that are Z,V,L and D type.The exhaust pressure ranges from
1.3 to 100 Mpa. The products are widely used in the industries of national defense,scientific research, petrochemical, nuclear power, parmaceutical, food-stuff and gas separation.
We offer a wide variety and types of diaphragm compressors. You can install these in many different scenarios. It is possible to install the compressors in
hydrogen houses between and electrolyzer and a storage system, in businesses to support their needs such as
ice cream companies for hydrogenation, at farmers where they
use it to produce ammonia or as a fuel at the back of
a wind farm or solar farm, and
refineries to pressurise the hydrogen before it is being used to
clean up the gas or oil. There are also many applications for our
H2 gas compressors.
For instance, you can also use the diaphragm compressor in green hydrogen transport applications, energy storage solutions, grid balancing, food processing, and power station cooling. We pride ourselves at ensuring that as many applications of our compressor units use renewable electricity to pressure the hydrogen.
Each of our H2 compressor units is unique. It is built to your needs all with the latest innovations in hydrogen compression, safety, and operation. We offer different hydrogen flow and pressures all set to match your storage working pressure.
We can customize hydrogen into different types of storage systems at 150bar 200 bar, 350 bar (5000 psi), 450 bar, 500 bar, 700 bar (10,000 psi), 900 bar (13,000 psi).
Main technical data
Cylinder
All the cylinders
comprise upper plate,
diaphragms, and
cylinder body etc. The diaphragms are clamped between the cylinder cover and cylinder body. The cylinder cover and cylinder body each has a
concave recess hollowed out in their contacting faces. The gas cylinder is formed between
cylinder cover concave recess and
diaphragms. Both
suction valve and discharge valve are fitted on the upper plate. Among of them, the
discharge valve is located on the
center of the
upper plate. The evenly located small oil holes are on the cylinder body to deliver the oil pressure inside the oil cylinder to the bottom of diaphragms
(each diaphragm compressor's cylinder has three piece diaphragm.)
Pressure Regulating Valve
The oil pressure of oil cylinder is regulated by the tension of the valve spring.In case the oil pressure is higher than the regulated value, turn the regulating bolt counter-clockwise to loosen the spring tension, but turn the regulating bolt clockwise to tighten the spring, when the oil pressure is lower than the regulated value. When the oil pressure meets the required value, the regulating bolt must be locked with a lock-nut. The oil pressure of the oil cylinder shall always be higher than the discharge pressure by 15~20%. But the oil and gas differential pressure shall not be lower than 0.3MPa or higher than 1.5MPa.
Cooler
The cooler structure is the double-wall pipe type. The circular space between the outer and inner pipe is the cooling water passage and the inner pipe is the gas passage. Normally the water inlet port is at the lower side and the water outlet port is at the upper side. The flow direction of cooling water and gas is on the contrary.
Oil Pressure Measuring Device
The measuring device of oil cylinder discharge pressure consists of shock-proof pressure gauge, check valve and unloading valve. The case of the pressure gauge is totally airproof and filled with damping liquid. The inner devices of gauge is immersed in the liquid, which makes the pressure gauge hands stable through the function of the viscosity of damping liquid. The unloading valve is fitted under the gauge to discharge the remained air in the oil pipeline and to unload the oil pressure gauge. Also the check valve connecting with oil cylinder through pipeline is fitted under the unloading valve.
Oil pipes
Oil pipes consist of lube oil pipe and oil pressure secure system.
The lubrication for the driving device adopts gear oil pump circulation pressure lubricating. The lube oil stored in the frame oil tank enters into the gear oil pump after being filtered and is pressed into the oil holes in the crankshaft through the gear oil pump to lubricate the crankshaft friction surface. At the same time, part of the lube oil reaches the crosshead pin and crosshead along the oil holes in the connecting rod to lubricate the friction surface. The oil pressure of gear oil pump shall be kept between 0.3~0.5Mpa, and the bearings at the two ends of crankshaft is splash lubricated.
Oil pressure secure system consists of oil compensating pipe, pressure-measuring pipe and oil return pipe. The oil output from the oil compensating pump will supplement oil for compressor cylinders through the oil compensating pipe and the excess oil returns to the crankcase through the pressure-regulating valve.
FAQ
Q1: What's your delivery time?
A: Generally 5-10 days if the goods are in stock. Or it is 20-35 days if the goods are not in stock, it is according to quantity.
Q2: How long is your air compressor warranty?
A: Usually 1 year /12 Months for whole compressor machine, 2years/24months for air end (except maintenance spare parts.). And we can provide further warranty if necessary.
Q3: How long could your air compressor be used?
A: Generally, more than 10 years.
Q4: Can you do OEM for us?
A: Yes, of course. We have around two decades OEM experience.And also we can do ODM for you.
Q5: What's payment term?
A: T/T, L/C, D/P, Western Union, Paypal, Credit Card, Trade Assurance and etc. Also we could accept USD, RMB, GBP, Euro and other currency.
Q6: How about your customer service?
A: 24 hours on-line service available. 48hours problem sovled promise.
Q7: How about your after-sales service?
A: 1. Provide customers with intallation and commissioning online instructions.
2. Well-trained engineers available to overseas after-sales service.
Q8. Are you factory?
A4: Absolutely! You have touched the primary sources of Air /Gas Compressor. We are factory.
How to contact with us?
Send your Inquiry Details in the Below, or Click "Send inquiry to supplier" to check more other Gas Compressor machine equipment!
){kind=link}