| Customization: | Available |
|---|---|
| Journal Diameter Dimensional Accuracy: | IT6-IT9 |
| Journal Surface Roughness: | 0.63-0.16μm |
|
Still deciding? Get samples of US$ 80/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Compressor Main Spare Part Structure Instruction
The basic part mainly includes: crank case, crankshaft, connecting rod, cross head, its role is to connect the foundation and the cylinder part and transmit power.
The performance of a reciprocating piston compressor mostly depends on a suction filter, suction & discharge valves, and piston rings. Hence due care required to be taken.
Above mentioned parts especially valves require a periodic inspection and maintenance.
Connecting Rod
The connecting rod is divided into two parts: connecting rod body and connecting rod big end bush cover, which are connected into a whole by two tensile bolts. The connecting rod big end bush is split type. The material of bush back is carbon steel. The bush surface is bearing alloy. The two ends are flanged for axial positioning. The inner surface of big end hole is inlaid with cylindrical pin, which is used for radial positioning of big end bush to prevent the Bush from rotating. The connecting rod small end and small end bush are integral type, and the bush material is tin bronze. The screw hole at the big-end tile cover of the connecting rod is used for lifting when disassembling, and the eye bolt should be removed after assembly.
Crosshead hydraulic connection fastening device
The hydraulic connecting and fastening device is used for connecting the piston rod and crosshead body, which is mainly composed of the connecting device and the fastening device.
Principle: after connecting the piston rod and crosshead by connecting the fastening device, inject 150MPa pressure oil into the pressure body of the fastening device with the random tool of manual high pressure oil pump. By using the incompressible property of liquid, push the piston, force the end of piston rod to produce elastic tensile deformation, and then lock the lock nut, release the oil pressure, so as to achieve the pre tightening force required for connection.
Connecting Cylinder
The connecting cylinder is a cylindrical structure made of cast iron. There are two types of single chamber and double chambers. For the compression of flammable, explosive or toxic media, the double compartment type is adopted. The intermediate sealing packing is installed at the middle compartment. Which is used to prevent leaking gas from the cylinder from entering the compressor. Each chamber is provided with a vent at the top and a blowdown valve at the
bottom. The chamber on the cylinder side is provided with nitrogen filling, leakage recovery, cooling water connection flanges and joints as required for connection with external pipeline: The leakage gas of the main packing and the leakage gas of the short-middle body can be discharged to the safe area through the external pipeline. The nitrogen gas in the long-middle body can be continuously replaced by external pipeline. There is no intermediate sealing packing and nitrogen filling port for the single-chamber of connection cylinder, and the other interface are set as required.
Cylinder
The cylinder is mainly composed of cylinder seat, cylinder and cylinder head. It is made of cast iron and equipped with cooling water interlayer.The cylinder is provided with a support leg for supporting the cylinder weight and adjusting the cylinder level.
Piston
The piston parts are composed of piston, piston rod, piston nut, piston ring, support ring and other parts. Each stage of the piston is equipped with a different number of piston rings and support rings for sealing the compressed medium and supporting the weight of the piston.
Sealing Packing
The sealing packing is composed of a plurality of sealing elements, and each group of sealing elements is mainly composed of a gas blocking ring, a tangential sealing ring, a flow blocking ring and a tension spring. In order to reduce the working load of each group of sealing elements, when the sealing pressure is high, a throttle ring is provided near the cylinder side.
For the oil-lubrication type, there is an oil injection hole in the sealing packing, which can be injected the lubrication oil. For the oil-free type, there is no oil injection hole.
Each stuffing box is equipped with a group of sealing elements, which are composed of gas choke ring, tangential ring and flow choke ring. The sealing element material is divided into copper alloy or filled with PTFE plastic ring. The copper ring is only used for oil lubrication occasions, and the plastic ring is suitable for oil lubrication type or oil-free lubrication occasions. This machine adopts PTFE plastic ring.
Gas Valve
The gas valve is mainly composed of valve seat, valve cover (lift limiter), valve plate and spring (mesh valve and buffer plate and lift pad). The valve spring is made of stainless and acid resistant steel wire, which has high corrosion resistance and fatigue resistance, and can significantly improve the service life of the valve.
Oil Scraper
The oil scraper is mainly composed of gland, shell (oil scraper box), oil scraper ring and tension spring. The oil scraper ring is a plane three piece straight opening type, made of tin bronze. The oil return hole is set under the shell (oil scraper box), which can flow the scraped oil back to the oil pool of the compressor through the oil return hole.
){kind=link}